 |
Epoxy Bottom Oil EP-079 |
Property
It is a kind of bi-component epoxy bottom coating with special epoxy resin as its main agent, polyamide curing agent as its main film forming matter, added with solvent and surface active agents. It is used as primer coating for epoxy coating for the purpose of increasing ground adhesive force and sealing. It has strong adhesive force with cement surface, and does not crack or peel.
Use
For corrosion resistance, dust proof, mold proof and germ proof of wall, ceiling and floor of various workshops, such as GMP pharmaceutical factory, food products factory, spinnery, paper mill and operating room in hospital, etc.
Packing: Main agent 16kg/barrel Curing agent 16kg/barrel.
Main technical data |
Color: light brown |
Adhesive force (1mm specification)
class: ¡Ü2 |
Viscosity £¨25¡æ£©: 10-30CPS |
Impact resistance Kg.cm:¡Ý50 |
Drying time h: surface drying¡Ü4h,
practical drying ¡Ü24h |
Alkali resistance, 20%NaOH,
48h:yellow |
Pencil hardness: ¡ÝHB |
Alkali resistance, 30%H2SO4,48h£ºyellow |
Abrasion resistance, 500g,
1000 revolutions, g: ¡Ü0.5 |
Proportioning, main agent:
curing agent= 2:1 |
|
Notices:
1 Stop construction in rainy day or in case of high relative humidity, and it is recommended that humidity for construction below 80% and temperature not below 10¡æ.¡¡¡¡
2 A certain amount of epoxy thinner can be added in accordance with temperature during construction. Addition amount is about 5-10%.
Construction workmanship
Treating substrate¡úCoating bottom oil
|
|
Self-leveling Epoxy Floor Coatin EF-157 |
Property
It is a kind of bi-component floor coating with solvent free epoxy resin as its main agent, curing agent of modified curing agent of alicyclic amine as its main film forming matter, added with high quality pigment, and an appropriate amount of aggregate and surface active agents. With low viscosity, it can be directly laid on ground to obtain self-leveling effect. It is suitable for use in an environment where high cleanliness and smooth surface are required, and it is dust proof, germproof, and non-penetrating, featuring strong drug resistance, strong adhesion. It does not crack or peel, and is abrasion-resistant and easy to clean.
Use
GMP pharmaceutical factory, food products factory, electronics factory, operating room, sterilizing room, dust free room, warehouse, hospital and school, etc.
Packing: main agent 16kg/barrel Curing agent 4kg/barrel
Main technical data |
| Color and appearance: various colors, level and smooth |
Adhesive force, class: ¡Ü1 |
| Viscosity £¨25¡æ£©: 1000¡À500CPS |
Impact resistance Kg.cm: ¡Ý 50 |
| Drying time£¨25¡æ£©: surface drying¡Ü4h, practical drying¡Ü24h |
Alkali resistance, 48h£ºgood |
| Pencil hardness: ¡Ý2H |
Acid resistance, 20%HCL;48h:good |
| Abrasion resistance, 500g, 1000 revolutions, g:¡Ü0.02 |
Proportioning, main agent: curing agent=1:1 |
|
Notices
1 Stop construction in rainy day or in case of high relative humidity, and it is recommended that humidity for construction below 80% and temperature not below 10¡æ.
2 It is recommended that construction thickness below 1mm, and immediately remove
sand or other impurities if found when coating.
3 It is available for use after curing for one week during which cleaning with wet mop is not allowed.
Construction workmanship
Treating substrate¡úCoating bottom oil¡úScraping putty¡úConstruction of middle paint¡úConstruction of surface paint |
|
Mortar Epoxy Intermediate Coating (EF-158) |
1. Characteristic
Bi-component grounding materials consisted of small molecular weight epoxy resin (as host material) and modified polyamide hardener (as main film-formative substance), as well as adding of filler, solvent and surface active agent, are used for compressive heavy-duty ?floor, which has good adherence to concrete without crack and scaling.
2. Usage
It is widely used for old epoxy ground repairing, dustless wall coating of walking or storage places, such as packing room, walkway, etc. and mildew-proof coating of food factory.
3. Main technical index |
| Color and coating film appearance: various colors, smooth and leveling |
Adhesion (1mm) grade: ¡Ü1 |
| Viscosity (25¡ãC): 1000¡À500CPS |
Impact resistance (Kg.cm): ¡Ý 50 |
| Drying time (h): skin drying¡Ü4h, solid drying¡Ü24h |
Alkali resistance to 10%NaOH,48h: good |
| Pencil hardness ¡Ý HB |
Acid resistance to 10%HCL;48h: good |
| Abradability 500g, 1000g: ¡Ü0.5 |
Mixture ratio: main material£ºhardener =3£º1 |
|
4. Attention issues
4.1 Work shall be stopped in rainy days or in wet weather. Recommended work humility shall be less than 80% and temperature no less than 10¡ãC.
4.2 If too much viscosity, special epoxy thinner (approx. 10%) shall be added.
5. Packing: main material is packed in 24KG each barrel and hardener in 8KG each barrel. |
|
Epoxy flow automatically topcoat (UM-056) |
1.speciality
It makes up of high quality liquid epoxy resin and harder two groups system product . It is used on high requirement of intention, impacting ,burthen area .It has high physical intention and good chemical resistance .Good adhension with cement , good abration ,high gloss ..
2.purpose
Many kinds of GMP medicine factory ,electron factory , packinghouse , asepsis plant , hospital ,school , and so on .
3.technical specifications |
| color£ºmany kinds |
adhension(1mm cross hacthing)£º¡Ü1 |
| viscosity(25¡£C)£º2000¡À500CPS |
Impacting Kg.cm£º¡Ý70 |
| Dry time25¡£C:surface ¡Ü6h£¬complete¡Ü48h |
Alkid resistance£¬20%NaOH£¬120h£ºno differen |
| Pencil hardness£º¡Ý3H |
Acid resistance£¬ 40%H2SO4 £»120h£ºno different |
| abration£¬500g£¬1000ת£¬g£º¡Ü0.2 |
Ratio:mainly component:harder =4:1 |
|
4.notice proceeding
1, It should be used relative humidity less than 80% and temperature during 10°C -30°C¡£
2, The thinner should not be added according to the temperature of compound material .
5.Packing : mainly component 16kg/bucket ,harder 4kg/bucket
6. Application craftwork :(see engineering applicationg method )
|
|
Antistatic Epoxy Floor Conductive Intermediate Coating (EM¡ª078) |
1. Characteristic
Bi-component conductive intermediate coating is consisted of small molecular weight epoxy resin as host material and modified polyamide hardener as main film-formative substance, as well as adding of conductive graphite, solvent and surface active agent. Formed paint film can effectively disperse the electric charge accumulated on surface.
Surface resistance of paint film shall be less than103ohms. At meanwhile, formed coat film shall prevent electrostatic sparks with good electromagnetic stability.?
2. Usage
it is used to prevent static epoxy, such as: ?
Precision industry: electronic parts factory, precision instrument, magnetic tapes & films factory, computer center
Chemical industry: flammable liquid factory, munition warehouse
Special places: operating room, survey center
3. Main technical index |
| Color and coating film appearance: black color, leveling |
Adhesion (1mm) grade:¡Ü1 |
Viscosity (25¡ãC): 5000¡À1000CPS |
Impact resistance (Kg.cm): ¡Ý 40 |
Drying time (h): skin drying¡Ü4h, solid drying¡Ü24h |
Alkali resistance to 10%NaOH, 48h: good |
| Pencil hardness ¡Ý H |
Acid resistance to 10%HCL, 48h: good |
| Abradability 500g, 1000g:¡Ü0.4 |
Mixture ratio: main material£ºhardener =3£º1 |
|
4. Attention issues
1. Grounding device shall be provided in accordance with process requirements. For details, pls refer to appendix.?? ?
2. Epoxy thinner (approx. 5%) shall be added in conductive primer.
5. Packing: conductive primer?? main material is packed in 24KG each barrel and hardener in 8KG each barrel. |
|
Antistatic Epoxy Abrasion-resistant Floor Coating £¨EM-176£© |
Property:
It is a kind of bi-component antistatic epoxy floor coating with high molecular epoxy resin as its main agent, modified polyurethane as curing agent, added with pigments, conductive powders and surface active agents. The paint film formed can effectively disperse charges accumulated on surface, and resistance of paint film surface is less than 100M¦¸. At the same time, the formed paint film is abrasion resistant and bump resistant. It features antistatic sparks, excellent electro-magnetic stability, and it is sanitary, smooth, dust proof, easy to clean, with good appearance.
Use:
Mainly used in environment where prevention of static interference is required:
Precision industry: electronic parts plants, precision instrument, tape and film plant, computer center.
Chemical industry: inflammable liquid plant, arms warehouse.
Special sites: operating room, measuring center.
Packing:
conductive primer Main agent 24kg/barrel Curing agent 8kg/barrel
Antistatic coating Main agent 24kg/barrel Curing agent 16kg/barrel
Main technical data: |
| Color and appearance of paint film: various colors, level and smooth |
Adhesive force (1mm specification) class: ¡Ü1 |
| Viscosity £¨25¡æ£©: 2000¡À500CPS |
Impact resistance Kg.cm£º¡Ý50 |
| Drying time h: surface drying¡Ü2h, practical drying ¡Ü24h |
Alkali resistance, 10% NaOH, 48h: good |
| Pencil hardness: ¡Ý2H |
Acid resistance, 10% HCL, 48h: good |
| Abrasion resistance, 500g, 1000 revolutions, g: ¡Ü0.3 |
Proportioning, main agent: curing agent= 3:2 |
| Resistance of conductive surface ¦¸: ¡Ü 103 |
Resistance of antistatic surface ¦¸: ¡Ü 108 |
|
Notices:
Grounding device shall be installed strictly in accordance with workmanship
Construction workmanship
Treating substrate¡úCoating bottom oil¡úScraping putty¡úLaying conductive layer¡úCoating epoxy conductive coating¡úCoating surface layer |
|
Top figure Epoxy floor coating paint EF-156 |
1.speciality
It is a kind of bi-component floor coating with solvent free epoxy resin as its main agent. It is used on high requirement of intention, impacting ,burthen area .It has high physical intention and good chemical resistance .Good adhension with cement , good abration ,high gloss ..
2.purpose
For corrosion resistance, dust proof, mold proof and germ proof of wall, ceiling and floor of various workshops, such as GMP pharmaceutical factory, food products factory, spinnery, paper mill and operating room in hospital, etc.
Packing: Main agent 16kg/barrel Curing agent 16kg/barrel.
3.technical specifications |
| color£ºmany kinds |
adhension(1mm cross hacthing)£º¡Ü1 |
| Viscosity £¨25¡æ£©: 400¡À200CPS |
Impacting Kg.cm£º¡Ý40 |
| Dry time25¡æ:surface ¡Ü4h£¬complete¡Ü24h |
Alkid resistance£¬20%NaOH£¬120h£ºgood |
| Pencil hardness: ¡Ý2H |
Acid resistance£¬ 40%H2SO4 £»120h£ºgood |
| abration£¬500g£¬1000£¬g£º¡Ü0.3 |
Ratio:mainly component:harder =4:1 |
|
4.notice proceeding
1, 1 Work shall be stopped in rainy days or in wet weather. Recommended work humility shall be less than 80% and temperature no less than 10¡ãC.
2 A certain amount of epoxy thinner can be added in accordance with temperature during construction. Addition amount is about 5-10%.
3.Protect for one week,and can¡¯t be sweeped with wet sweeper in this period
5.Packing : mainly component 16kg/bucket ,harder 4kg/bucket
6.Application craftwork :(see engineering applicationg method ) |
|
Epory-anti corrosion top coating EF-159 |
1.speciality
It is a kind of bi-component floor coating with solvent free epoxy resin as its main agent. It is used on high requirement of intention, impacting ,burthen area .It has high physical intention and good chemical resistance .Good adhension with cement , good abration ,high gloss ..
2.purpose
For corrosion resistance, dust proof, mold proof and germ proof of wall, ceiling and floor of various workshops, such as GMP pharmaceutical factory, food products factory, spinnery, paper mill and operating room in hospital, etc.
Packing: Main agent 16kg/barrel Curing agent 16kg/barrel.
3.technical specifications
|
| color£ºmany kinds |
adhension(1mm cross hacthing)£º¡Ü1 |
| Viscosity £¨25¡æ£©: 5000¡À1000CPS |
Impacting Kg.cm£º¡Ý40 |
| Dry time25¡æ:surface ¡Ü4h£¬complete¡Ü24h |
Alkid resistance£¬20%NaOH£¬120h£ºgood |
| Pencil hardness: ¡ÝH |
Acid resistance£¬ 40%H2SO4 £»120h£ºgood |
| abration£¬500g£¬1000£¬g£º¡Ü0.5 |
Ratio:mainly component:harder =5:1 |
|
4.notice proceeding
1, 1 Work shall be stopped in rainy days or in wet weather. Recommended work humility shall be less than 80% and temperature no less than 10¡ãC.
3£®Protect for one week,and can¡¯t be sweeped with wet sweeper in this period
5.Packing : mainly component 20kg/bucket ,harder 4kg/bucket
6. Application craftwork :(see engineering applicationg method )
|
|
Epoxy self-leveling middle coating UM-068 |
1.speciality
It makes up of high quality liquid epoxy resin and harder two groups system product.Curing agent makes up of bi-componeat epoxy ?self-leveling middle coating materials.Silica sand can be added to increase hardness when use.It has high physical intention and good chemical resistance.Good adhension with cement ,good abration ,high gloss.
2.purpose
Many kinds of GMP medicine factory,electron factory,packinghouse,asepsis plant,hospital,school,and so on.
3.technical specifications |
| color£ºmany kinds |
adhension(1mm cross hacthing)£º¡Ü2 |
| Viscosity £¨25¡æ£©: 1000¡À500CPS |
Impacting Kg.cm£º¡Ý60 |
| Dry time25¡æ:surface ¡Ü4h£¬complete¡Ü24h |
Alkid resistance£¬20%NaOH£¬120h£ºno differen |
| Pencil hardness: ¡Ý3H |
Acid resistance£¬ 40%H2SO4 £»120h£ºno differen |
| abration£¬500g£¬1000£¬g£º¡Ü0.2 |
Ratio:mainly component:harder =2:1 |
|
4.notice proceeding
1, It should be used relative humidity less than 80% and temperature during 10¡ãC -30¡ãC¡£.
2 A certain amount of epoxy thinner can be added in accordance with temperature during construction. Addition amount is about 5-10%.
3.Packing : mainly component 18kg/bucket ,harder 9kg/bucket
4.Application craftwork :(see engineering applicationg method )
|
|
Resin Slurry? Paint UM-058 |
Property:
Resin slurry layer UM-058 consists of high quality liquid epoxy resin and curing agent, which cures at normal temperature. Silica sand can be added to increase hardness when use. It is suitable for use in environment where high strength, impact resistance and heavy load are required, featuring high mechanical strength and strong chemical resistance. It has strong adhesive force with cement surface, and does not crack or peel, and it has excellent performances of abrasion resistance, water resistance and oil resistance.
Usage
It is suitable for floor, parking lot, warehouse, material house, mechanical factory, control room, market, washhouse where abrasion resistance, heavy load resistance, impact resistance and chemical resistance are required, and overhaul of floor of old workshop.
Packing: Main agent 16kg/barrel Curing agent 4kg/barrel
Main technical data
|
| Color: Transparent and various colors |
Adhesive force, class: ¡Ü2 |
| Viscosity £¨25¡æ£©: 2000¡À500CPS |
Impact resistance Kg.cm£º¡Ý40 |
| Drying time £¨25¡æ£©: surface drying¡Ü4h, practical drying ¡Ü24h |
Alkali resistance, 20% NaOH, 120h: good |
| Pencil hardness: ¡Ý2H |
Acid resistance, 30%H2SO4£»120h£ºgood |
| Abrasion resistance, 500g, 1000 revolutions, g: ¡Ü0.2 |
Proportioning, main agent: curing agent= 4:1 |
|
Notices:
Compact it with machine or manually to prevent loosening which affects hardness and strength.
Construction workmanship:
Treating floor¡úCoating bottom oil¡úAdhesive layer¡úMortar layer¡úSealing layer¡úCoating surface layer
|
|
